Electrical safety devices

Electrical safety device for water supply (anti-flood system): The electrical safety device for water supply is an electrical component intended for flood prevention in case of failure; destined to dishwashers and washing machines. The product consists of a normally closed solenoid valve, a threaded ring nut connecting the water system, electrically insulated protective cover (IP67 - EN60529), an internal hose (water inlet hose), a corrugated external hose (safety hose) and an electrical connection cable. In case of water loss from the inlet hose, the water spillage is collected by the external corrugated hose and the conduit to the collector in the bottom of the household appliance where a sensor detects excess water and sends to the appliance’s control card a signal to close the inlet valve of the anti-flood system (eliminating any flood) and applying further safety strategies (e.g. by activating an outlet pump).

FEATURES AND TECHNICAL DATA: 
Length: standard 1.5 m (custom lengths available)
Capacity: 2.5 – 4.5 l/min for dishwashers / 6 – 10 l/min for washing machines / other capacities on client’s request
Supply operating pressure 0.2 – 10 bar  (0.02 – 1 MPa)
Maximum water temperature and duty cycle: 70°C or 90°C  AB 3/5min or 25°C 100% ED 
Ambient operating temperature: 5°C  - 60°C 
Electrical supply voltage: 120V AC (60Hz); 230V AC (50/60Hz); 220V/240V AC (50/60Hz)
Construction - internal hose: LDPE (dishwashers) or PCV with textile reinforcement (dishwashers and washing machines).
Construction – external hose: PP
Connection to water system: threaded nut UNI ISO 228  ¾ GAS with optional plastic nut; brass threaded plastic nut; brass nut
Connection to household appliance: Internal hose connection (dishwasher) for hose holder, diameter 11 mm (internal hose diameter 10 mm); Internal hose diameter (washing machines) with threaded nut ¾ GAS for fixing on the inlet valve at the household appliance (plastic fixing clamp on the client’s special request)
Electrical connection to household appliance: Faston male connector 6.3x0.8mm or Rast2.5 connection (other connectors on request)
Certifications: EN 60730 (solenoid valve); EN 61770 (hose set); WRAS approval (drinking water compliance); product with ENEC Mark

Our Sales Office remains available for any further queries, clarifications and consulting provided by our highly competent experts.
TP REFLEX has the right to change the contents of this catalog and denies any responsibility for other use / incorrect application of its products.